1. Automatic Induction: When someone enters its sensing range of input high, people Leave the Sensor Range Automatically Delay Off High, Output Low. 2. Two Trigger Modes: L can not be reposed, h can be reposed. Jumper Selectable, Default is H. A. Unrepeatable Trigger: The Sensor Output High, The Delay Time has elapsed, the output will be automatically from high to low. B. Repeatable Trigger: The Sensor Output High, The Delay Period, If There Is Human Activity With Its Sensing Range, The Output Will Remain High Until People Leave After Delay Will Be High Level Goes Low Ded Sensing Module detects the Human Body after every activities a delay period, and the last time an event is the starting point of the delay time). 3. Has blocked the induction time (The Default Setting: 3 ~ 4 Seconds): Sensor Module After Each Sensor Output (High To Low), You Can Keep Up A Blockade Set Time, During That Time nal . This function can be aged (Sensor Output Time and Blocking Time) Interval Between the Work Can Be Applied to Interval Detection Products; While this posture can effectively suppress various disturbances generated During the Switching.Applications: Pyroelectric Infrared Switch is Biss0001 With Pyrelectric Infrared Sensors and PassSive Infred. sisting of a small amount of external components. It can automatically and Quickly Opened All Kinds of Incandescent, Fluorescent, Buzzer, Automatic Doors, Electric Fans, Dryer and Automatic Washing Machines and other Devices, is a High-Tech Products. Especially SUITABLE FOR SENSITIVE AREA BUSINESS, HOTELS, SHOPPING MALLS, Warehouses and Family Aisles, Corridors, or Secure Area for Automatic Lighting, Lighting and Alarm Systems.Security Products, Body Sentors Toys. Induction Lamps, Industrial Automation and Control, etc.instructions For use: 1. After initiation time sensing module a minute or so, During the Module Will Output 0 ~ 3 Times at Intervals, One Minute After Entering Standby. 2. Should be available, such as interference sources Close to the Lens to Direct Light Module Surface, in Order to Avoid the Introduction of the Interference Signal Malfunction; Environment to air the flow of the wind, the wind sensor will also cause interference. 3. Sensor Module uses a dual problem, the probe window is rectangular, dual (A B Yuan Yuan) Located at Both Ends of Longer Direction, When the Body from Left to Right OR Right To Left Through, The Infred Spectr. The Dual Time, Distance Difference, The Greater The Difference, The More Sensitive the Sensor, When the Body from Top to Bottom Or Front to Probe or Direction from Bottom to Top Through Time, Dual Infrared SPECTRUSCOPOSCOPY TOPEJTS IN The distance is less than, no Difference Value, so the sensor insensitive or does not work; Sensors should be installed so that the probe up to the directoration and orientation of human activity dual parallel as possible to ensure that the human body has been through dual sensing probe. In order to Increase the Angular Range of the Sensor, the Module Uses a Circular Lens, But Also Makes the Probe Sensors on All Four Sides, but the Left and Right Side Still Large Sensing Range Than Down In Both Direction, The Sensity Iss. Strong , The Installation Still Possible accounting to the above requirements.Generalcolordeep BluematerialGlass Fiber + Plastic + IronsSpecificationApplicationHuman Infrared Sensor ModuleWorking Voltagedc 5 Uresother Featurescorking Voltage: DC 5 ~ 20V; Static Power Consumption: 65UA; Output Level: High 3.3V, Low 0V; Delay time: adjustable (0.3 seconds to 10 minutes); Blocking time: 0.2 seconds; Trigger: L can not be reposed, h can be reposed, the default value h; Sensing Range: Less Than 120 Degree Cone Angle, Less Than 7 Meters; Working Temperature: -15c ~+70cdimensions Weightdimensions1.3 in x 0.98 in x 0.94 in (3.3 cm x 2.5 cm x 2.4 cm) Weight0.21 oz (6 g)